Wall Systems

---

CleanSpace® The CleanSpace® Wall System is a 20-Mil thick reinforced plastic liner that is installed with permanent, drilled-in fasteners. It is a fast, economical way to cover ugly walls, stop water vapor from the walls, and drain wall leaks. The white color really brightens a basement, reflecting available lighting. CleanSpace® Wall System makes a dry wall and brightens the basement. Not quite as finished looking as BrightWall® but costs about 30% less. If you are looking for a quick, economical way to dry and improve the appearance of your walls, this system is for you.

BrightWall® The BrightWall® Paneling System is 4' x 8' sheets of plastic paneling attached to the walls with special drilled-in fastners that will never come off of the wall. BrightWall® provides a clean, bright, semi-finished look to your basement walls while stopping water vapor from permeating your walls and draining any leaks down to a water management system. It is the best looking and most durable of the three wall system options. If your basement will remain unfinished, and you want the nicest look possible, this is the system for you.

ThermalDry® The ThermalDry® Basement Wall System stops water vapor, drains wall leaks, and does something the other two systems cannot do - it reflects up to 97% of the indoor heat back into the basement. This saves energy and money because your heat is not absorbed and lost into the perpetually cold basement walls. ThermalDry® Wall System makes a dry, energy-effecient wall. If you are going to finish your basement sometime in the future, this is the system for you. When finishing your basement, leave a 1/2" space in front of ThermalDry for maximum benefit. Also - ask about our ThermalDry® FLOOR Tile system to lay under your carpeting.